• Automotive Cleaners
• Abrasives
• Polishes
• Protective Agent
• Coating
• Glass Care
• Beauty Supplies
• Tools Series

Type：Protective Agent

Name：C-1 HIGH GLAZE PROTECTIVE AGENT

Original：

Special offer：

Remark：

HIGH GLAZE PROTECTIVE AGENT

Product performance

1. a yellow painting surface protecting membrane contained wax, silicon and adding Teflon to strengthen efficiency. It is not only very simple and convenient to wax off while use it also having long-term protective action efficiency.

2. With Teflon’s strengthen efficiency prescription made by high polymer resin to form the unique protection membrane, can totally combine with painting surface and give play to long-term of protective action, very simple, convenient while wax on and off, multipurpose prescription, suitable for high-low speed grinding machine, track shake plate, air shake plate waxing machine or having the membrane method by hand.

Apply modes

1. Make sure that touch the painting surface is cool when using the product agent.

2. Begin from the roof top, then engine cover, back trunk and both side.

3. Put a little product agent on the surface each time.

4. Choose the area size by shoulder width and arm length has put a little product agent on the surface. Using high speed grind machine with thin wool plate or thin sponge plate with even light pressure until clean, the thin wool plate and thin sponge plate need to clean while using.

The track shakes plate, Air pressure wax machine or handmade wax membrane:

1. Shake first before using and while using the product agent (It is normal that this product separates the phenomenon)

2. Begin from the roof top, then engine cover, back trunk and both side.

3. Apply suitable among to track vibrator plate or air compression waxing machine or clean, soft and moist sponge with this product onto the paint surface evenly to wait to dry to become a protect membrane.

4. After the protecting membrane is dry (Normally It takes about 30 minutes, if toast by infrared ray lamps it takes about 15 minutes), by using the track vibrator plate covered with clean towel padding or using clean towel with circular motion to polishes the surface.

5. Wipe off the surplus with clean towel.

Main Contain

Yellow milk form, fine durability, contains silicon, wax and Teflon, will not damage any paint material.

Precautions

1. Do not use on overheating surface or directly under sunlight.

2. Don't let the product drying on the surface, add the water or remove the product of agent at any time.

Validity 18 months

Capacity 1kg/tank, or 3.75kg/barrels